• The Combination of 3D Systems’ Materials and Technology Enabled First-of-Its-Kind Luxury Faucet
  • 3rd Dimension’s Industrial 3D Printing Expertise Brings Concept to Reality

ROCK HILL, South Carolina, Jan. 9 , 20183D Systems (NYSE: DDD) announced that KALLISTA, a leading designer and provider of luxury kitchen and bath products, unveiled the Grid™ sink faucet – which was produced by 3rd Dimension using 3D Systems’ 3D printing materials and technology - today at KBIS 2018. 3D Systems’ technologies afforded KALLISTA design without limitations to bring this first of its kind sink faucet to market.

KALLISTA’s design team embarked on a journey to create a faucet in a unique geometry. In deciding to produce the spout via 3D printing, the designers were able to design without limitations to create an open form and discreet interior channels that allow water to flow easily through the base.

“Designers usually need to consider a manufacturing process and they have to design around that process,” said Bill McKeone, design studio manager, KALLISTA. “By choosing to produce this faucet via 3D printing, we opened ourselves to limitless design possibilities. 3D Systems’ breadth of materials and technologies allowed us the freedom to create a unique, functional faucet which would not have been possible with a traditional manufacturing process.”

The faucets were produced by metal 3D printing specialist, 3rd Dimension, a high quality production metal manufacturer specializing in 3D direct metal printing based in Indianapolis. 3rd Dimension employed 3D Systems’ ProX® DMP 320 high-performance metal additive manufacturing system. To avoid rust and corrosion, the faucets are printed with 3D Systems’ LaserForm® 316L, a high quality stainless steel 316 powder material.

“In order to realize the best product, you have to start with the best tools,” said Bob Markley, president, 3rd Dimension. “The strength of the 3D Systems technology and materials, coupled with the expertise of our engineers and machinists allowed us to rapidly produce and deliver these high end faucets for KALLISTA.”

As this was the first additively manufactured product for KALLISTA, the team at 3rd Dimension led them through a program to develop the as-designed concept for the 3D printing process. Developing the design for additive manufacturing meant that KALLISTA was able to avoid the common delays of weeks or months needed for any kind of production tooling. 3rd Dimension’s experience with the 3D Systems ProX DMP 320 and engineering expertise enabled KALLISTA to produce the Grid faucet flawlessly. Because of the efficiencies and repeatability afforded by 3D printing, the parts were rapidly produced within hours.

“This is just one example of the value 3D printing brings to a production environment,” said David Cullen, director of applications engineering, 3D Systems. “Through the combination of materials, print technology, software and services, KALLISTA was able to bring their visionary design to market.”

For more information, please view the video or visit the 3D Systems website.

 

Déclarations prospectives

Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward looking statements can be identified by terms such as "believes," "belief," "expects," "may," "will," "estimates," "intends," "anticipates" or "plans" or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions and current expectations and may include comments as to the company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings "Forward-Looking Statements" and "Risk Factors" in the company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as the date of the statement. 3D Systems undertakes no obligation to update or review any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.

À propos de 3D Systems

3D Systems provides comprehensive 3D products and services, including 3D printers, print materials, on demand manufacturing services and digital design tools. Its ecosystem supports advanced applications from the product design shop to the factory floor to the operating room. 3D Systems’ precision healthcare capabilities include simulation, Virtual Surgical Planning, and printing of medical and dental devices as well as patient-specific surgical instruments. As the originator of 3D printing and a shaper of future 3D solutions, 3D Systems has spent its 30-year history enabling professionals and companies to optimize their designs, transform their workflows, bring innovative products to market and drive new business models. More information on the company is available at www.3dsystems.com

About 3rd Dimension

3rd Dimension is a high quality production metal manufacturer specializing in 3D direct metal printing based in Indianapolis that backs up its work expertise with an entire shop floor team for machining, milling, and finishing to enable metal part projects to be rapidly fulfilled. 3rd Dimension uses metal additive systems from 3D Systems. Learn more at www.print3d4u.com.

About KALLISTA

KALLISTA is known for its designs of luxury plumbing products, offering faucets and fixtures thoughtfully created for tasteful, whole-bath solutions. KALLISTA is available in fine showrooms in major cities throughout the world. Kallista, along with sister brands Ann Sacks Tile and Stone, Inc., and Robern mirrored cabinetry and vanities, is a division of the Kohler Co. Decorative Products Group, a wholly owned subsidiary of Kohler Co.

About KOHLER®

Founded in 1873 and headquartered in Kohler, Wis., Kohler Co. is one of America’s oldest and largest privately held companies.  Kohler is a global leader in the manufacturer of kitchen and bath products, engines and power generation systems, cabinetry, tile and home interiors, and international host to award-winning hospitality and world-class golf destinations.