Benefits & Advancements

Vacuum Chamber
Best-in-class vacuum chamber design maintains typically ~10 ppm oxygen environment for the purest printing atmosphere resulting in superior part densi
Build Flexibility
350 models have an ideal 31.7L build vol. with optional reducer to 3.3L. Triple also offers larger 42.8L option
Multiple Workflows
3 scalable powder management workflows to match the situational needs of the environment
Part Quality
Best-in-class Nickels, Tungsten, Titanium, Coppers, and more. Excellent density parts with high detail direct from the printer

Vacuum Chamber Architecture

3D Systems has developed a unique vacuum chamber to improve process efficiency and part quality and reduce overall manufacturing costs in metal AM. In order to consistently achieve these benefits throughout the workflow from printing to material recycling.

Vacuum build chamber for the DMP Flex 350 Triple 3D printer
Vacuum build chamber with RPM inside for a stable print process
Row of DMP Flex 350 Triple 3D printers
DMP Flex 350 models are compact to maximize floor space

Lower Total Cost of Ownership

TCO and final per-part costs are important factors. The modularity of the DMP 350 solution allows manufacturers to define a factory setup that is tailored to their application and capacity requirements and maximizes the use of each module. This includes configuring an optimal workflow for machine operators with smooth integration of post-processing steps. The DMP 350 enables consistent-quality parts production and nearly eliminates waste and scrap, thereby optimizing part costs and TCO.

Superior Part Quality

Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi.

275 plate heat exchanger
350 x350 x 350 mm print Volume
3DXpert rendering
3DXpert™ is included with every DMP printer

Powered by Premium 3DXpert™

Empowering the DMP350, 3DXpert™ is an integrated software handling the entire spectrum of the AM workflow. 3DXpert™ allows you to leverage the full potential of AM with complete control over the preparation and manufacturing process. Supporting every step of the AM workflow from design to post-processing, 3DXpert™ streamlines your process to quickly and efficiently transition from a 3D model to successfully printed parts.

graphic of the DMP Flex 350 printer with the door open
Pioneering 3D Printing:

Metal Additive Manufacturing

Direct Metal Printing (DMP) was born of our pioneering laser-based additive technology from 1986. In 1989, our subsidiary DTM patented the first laser sintering (SLS) process and commercialized the first machine in 1992. This enabled metal-filled polymers to be directly printed rather than machined. In 2000, our subsidiary Phenix Systems was founded to commercialize Direct Metal Laser Sintering (DMLS) using a proprietary process. In 2008, our subsidiary Layerwise advanced the process with best-in-class vacuum technology and opened the door for DMP printers to directly build superior metal parts that are ready for use in the most demanding applications.
 

Main Applications

While direct metal printing can be useful to build parts for any industry, it is especially valuable in the following market segments.

A 3D printed nickel rocket heat exchanger.

Aerospace & Defense

Excels when parts need to endure the strain of Rocketry, Space Flight, Marine corrosion, Nuclear, Cryogenic, and more.

Bone replacement lattice for Healthcare

MedTech

From implantable orthopedic bone replacements, to dental prosthesis, to the collimators that make radiology possible - DMP is advancing medicine.

A 3D printed DMP helical contractor cutaway

Semiconductor

Ideal for the custom parts needed by AI infrastructure, high-performance computing, wafer tables for chip manufacturing, heat exchangers, etc.

A 3D printed 275 plate eureka bearing housing

Turbomachinery

Specialized impellers, turbine blades, intricate internal valve geometries that traditional casting cannot achieve, parts for offshore petroleum and renewable energy.

Distinct Advantages of DMP Flex 350 Over Competitors

Lowest Oxygen Content

Our exclusive build chamber with RPM architecture has best-in-class low oxygen content of <25ppm, with a common working level of <10ppm. This produces superior parts of the highest purity and consistency.

Maximum Powder Usage

Precise laser performance, variable layer fineness, minimized or no support structures needed, inert build and powder management conditions to maintain metal purity... All these factors and more add up to maximum reusability.

Minimum Argon Usage

Some competitors continuously flood & waste inert gas to maintain the environment, DMP350 has a superior vacuum chamber design preventing argon loss, maintaining pressure during sintering. This minimizes expensive waste.

Stable Print Process

DMP Flex 350 uses proven build parameters, mature software, well-defined processes, all on a rugged-built chassis. It has excellent up-time with global service technicians from the original Additive Manufacturing provider.

Materials Compatible with this Printer:

Upcoming DMP Flex 350 series Events

Industrial Grade that is Designed to be Flexible

The 350 "Flex" series stands for Flexible. 1, 2, or 3 lasers, swappable inert build chambers, build volume ranging from 3.3-42.8L, over 25 potential materials, and various workflow paths. Industrial production that flexes with your needs.
Technical Specifications
Laser
Up to 3x 500 watt fiber lasers, 1070 nm wavelength
Printer Size
236 x 240 x 260 cm / 93 x 94 x 102 in
4200 kg / 9260 lbs
Build Volume Options (model & material dependent)
275 x 275 x 420 mm / 10.8 x 10.8 x 16.5 in
350 x 350 x 350 mm / 13.7 x 13.7 x 13.7 in Ø100 × 160mm / Ø3.9 × 6.3 in (with reducer)
Layer Thickness
30-180 µm typical, material dependent
NoSupports™ Option
Yes, unsupported angles down to 5 degrees are possible, reducing waste and lowering build time, geometry & material dependent
Site Requirements
Industrial power, ventilation, min. ceiling height and door width required, review facility guide for more information

Multiple Powder Management Workflows Supported

Some customers want the lowest hardware cost and opt for a more hands-on workflow. While some customers want the most hands-off workflow. Others will be focused on maximizing laser-on time to justify their ROI and increase machine productivity. We have options to support the workflow you require.

BCS workflow for the DMP Flex 350 Triple 3D printer

BCS Workflow

The BCS is the Build Changeover Station. A purpose built piece of hardware that uses an additional RPM to drastically cut hours between each build and minimum laser off-time.

DMP Flex 350 3D Printer

TSR Closed Loop Workflow

The TSR module with Closed-Loop kit enables an inert atmosphere to be maintained during the powder removal and sieve process.

Gravity feed workflow for the DMP Flex 350 Triple 3D printer

PMM Gravity Workflow

The PMM is the Powder Management Module, a shareable cleaning accessory that sieves and blends your recycled powder to maximize reusability.

Cyclone arm workflow for the DMP Flex 350 Triple 3D printer

Cyclone Arm Workflow

The PMM has an optional Cyclone Arm, enabling the hands-free reloading of sieved powder back into the printer.

AddiTrak™ Fleet Management

Take control of your 3D printing operations with AddiTrak™ Fleet Management—monitor performance, optimize utilization, and keep your entire fleet running at peak efficiency.

DMP Flex 350 Duel 3D printer at an angle
DMP Flex 350 product image
DMP Flex 350 product image left side
DMP Flex 350 Duel 3D printer at an angle
DMP Flex 350 product image
DMP Flex 350 product image left side

Frequently Asked Questions

3D Systems DMP is Direct Metal Printing. We use pure metal alloy power and concentrated laser power to produce parts in an inert gas environment. It is a laser sintering (LS) process that some generically referred to as laser powder bed fusion (LPBF), or selective laser melting (SLM). DMP builds parts in an extremely low O2 PPM environment using the best-in-class vacuum chamber.


Other technologies of additive manufacturing like direct energy deposition (DED), electron beam melting (EBM) and plasma-arc produce parts that are similar – but those processes uses a magnetic beam rather than a laser, with differences which are more similar to welding meaning parts are generally less accurate. Their material options are limited to conductive metals, unlike DMP which enables the possibility nearly any metal alloy desired.


No. Binder jetting chemically adheres metal powder together. ‘Metal’ parts produced in this way will not have the purity or durability of our parts and are unlikely to be safely used in an application requiring functional strength or purity certification. Even when their parts are sintered post-build, they are relying on incinerating the binder/impurities and causing the actual metal to expand to fill the gaps. This results in deforming the geometry beyond its original shape and can leave trace residue in the part. While they may produce a ‘metal’ part – it is not the same as Direct Metal Printing.


3D Systems’ Direct Metal Printing produces solid metal parts that are functionally indistinguishable from cast or machined metal parts, DMP parts can be strong and light enough to be certified for space flight, strong enough for rocketry or cryogenic use, corrosion-resistant for marine or nuclear applications, suitable for in-body medical implantation, and nearly anything in between.


3D Systems is proud to have worked with hundreds of companies including NASA, JPL, Airbus, Boeing, Raytheon, SpaceX, Johnson & Johnson, Jabil, Wilting, Portsmouth Naval Shipyard, Mercedes, Cadillac, Tiffany, dozens of universities. We have provided products and/or services to hundreds of global and regional customers for commercial, educational, research purposes, and more. 3D Systems offers metals, plastics, haptics, consulting, hardware, materials, and services.

Talk to an expert